Call 1-877-357-DOOR(3667) to speak with one of our design consultants today

Roll Up Doors Direct Model 650

Our most durable, quick to install and easy to maintain Door

Superior product + Recognized value

Model 650 roll up door 1 Model 650 roll up door 23rd generation of roll up doors

Built to be easy to install, durable and simple to maintain, our Model 650 Mini Storage Door includes features such as a ratchet tensioner, a factory installed stainless steel latch and an enclosed barrel that houses a dead axle assembly. This door design can eliminate the need for upgrades or additional charges. With our Roll Up Door, you simply snap the brackets into the guides and the door is ready to stand. This is not a Wind Load door.

A team of experienced door experts is available to assist you with any of your door needs.

 

Click any price below to buy


height and width Up to 7'0"7'1" to 8'0" 8'1" to 9'0" 9'1" to 10'0"
Up to 3'0" $354$395$794$927
3'1" to 4'0" $405$450$794$927
4'1" to 5'0" $454$505$794$927
5'1" to 6'0" $505$561$794$927
6'1" to 7'0" $554$614$794$927
7'1" to 8'0" $619$689$794$927
8'1" to 9'0" $665$745$829$927
9'1" to 10'0" $757$806$908$1013

**Please note that all of our doors are made to your opening size - If you don't find the size you need please call us at 1-877-357-DOOR Today!

Model Information Brochures


Roll Up Door Model 650 brochure

Model 650 Brochure

Model 650 Installation

Technical Drawing


New Black Color Available

New Black Roll Up Doors Now Available

Call 877-357-3667 for availability and pricing


Features of the Model 650 Mini Storage Door


Door springDoor Springs - During production, every spring is coated with a generous quantity of grease that penetrates the innermost pores of the spring with additives, displacing moisture and preventing the formation of rust and corrosion. additionally, this method relieves the friction created between spring coils, thereby providing effortless door operation. Finally, the spring and shaft assembly is enclosed in a tube to guard them from the weather encountered throughout the lifetime of the door.


Roll Up Door protectionPackage Protection and Shipping - Doors stacked on top of each other in transit are going to shift... unless they can be packaged in a way to minimize the movement that happens throughout the trip. Roll Up Doors Direct has found an answer. Every door is suspended separately within the crates. Whether they travel down the block or across the country, compaction damages, door abrasions and chatter marks are nearly eliminated.


Roll up door tensionRatchet Tensioning Device - The Roll Up Doors Direct ratchet tensioning device, provided as standard equipment on our door, offers an easier method of tensioning while more accurately fine tuning all the springs on the door at the same time. there's no additional hardware needed. Eight different positions on the tension wheel permit one to perfectly balance the door. There are not any pins needed to carry the tension on the spring... you simply just click it.


Rolling doors
Radial Ball Bearings - Roll Up Door supplies radial ball bearings at no additional cost to you.  Our permanently lubricated bearings require no maintenance and are guaranteed to last the entire life span of the door.


Door Stops - Our removable door stops are simple to install and prevent the curtain from over traveling the guide when raising the door.


Overhead DoorHead Axle and Torque Tube Assembly - This style, noted for its sturdiness and smooth Picture of roll up door stopsoperation with industrial applications, has currently been incorporated into the Model 650 self storage door. The tube housing protects the springs and strengthens the axle. Eliminating axle push and shift that can occur with a live axle, the dead axle style allows for a straighter travel path of the door curtain within the guides. the best feature of this style is that it affords the fine calibration of any spring adjustment to equally have an effect on all springs on the door at the same time.


Door Options

Roll up door locksMagnetic Zinc Coated Steel or Optional Stainless Steel Latch - Our patented mini latch features a cover plate made from a heavy gauge yellow zinc coated steel or optional stainless steel. In addition, the latch cover protects the slide from tampering by completely covering the slide, with the exception of a tab used to operate the latch. To further secure the door, the latch’s two inch throw, with its magnetic properties, can be incorporated with the new guidemounted security devices. This versatile design affords you the ability to utilize padlocks, cylinder locks or both.

Top Draft StopTop Draft Stop - 2 1/4" Black "L" shaped neoprene weather stripping affixes directly to the door curtain where the curtain meets the header and provides a barrier to weather elements. Rolls up in the roll when the door is in the up position.

insulated commercial doorInsulation is made of a foil-backed, dual-layer polyethylene air-bubble insulation secured in place with a strong adhesive and joined by mylar film (top draft stop and side draft stops are also included).

HoodHood - Recommended for exterior mount applications or for cosmetic look. If the door is being mounted on the outside of the building (where the drum is exposed to the weather elements) they're going to want a hood (or protective over-hang) because the drum of the door isn't weather-proof and will be damaged by rain, snow, etc. Insulated doors can't be mounted on the outside of the building or have a reverse curtain.

Roll up door locksSide Brush Seal - 2” Polypropylene Side Brush Seal with Aluminum Retainer mounts on the side your frame work. The flexibility of the brush allows complete seal of the roll up door corrugation. Keeping out dust, air flow, pesky insect and rodents.

Header SealHeader Seal - The header seal is made to attach directly to the header of your door’s opening. Header Seal is gray in color and measures 6" wide. This is an excellent way to block wind and debris from getting inside storage units or garages.


More Features

  • All Drums are fitted with a grease filled, shielded radial ball bearing to contribute to a smoother operation and reduce wear and friction.
  • Factory installed galvanized reinforced 12 gauge Brackets are designed to easily snap onto the guides, reducing installation time.
  • Galvanized, guide-mounted Head Stops are simple to install and prevent curtain over travel when raising the door.  Installed through the guide after curtain is lowered, they provide definite contact with the bottom bar angle and stop clips.
  • The Ratchet Tensioning Assembly is factory installed on the end of the door axle and allows precise fine tuning of the initial spring tension.  Increments of 1/8 turn are possible.  Tensioner adjusts both springs equally at the same time from only one end of the door.
  • Roll formed clear acrylic coated galvanized steel Bottom Bar reinforced with a 2" x 1-1/2", 11 gauge full width galvanized angle that extends fully into the guides.  The PVC bulb astragal provides positive contact with floor.  Lift handle(s) and stop clips installed on exterior side of bottom bar and a non-rotting pull rope is attached to the inside angle.
  • Oil tempered helical torsion Springs are factory lubricated to minimize friction and corrosion while increasing the spring cycle life.  Spring wire conforms to ASTM A 229.
  • Full width galvanized steel Barrel totally encloses the drums, springs and axle.  Barrel-type construction reduces door sag, eliminates drum dents and improves operation due to an even support of the curtain for the entire width.
  • Galvanized and pre-painted with long lasting silicone polyester paint, the 26 gauge Corrugated Curtain is roll formed from ASTM A 653 grade 80 full hard steel.  This premium steel yields greater door strength and minimized curtain damage.  Full height felt tape on back of curtain prevents nesting and reduces paint rubbing.  20 colors are standard with others available on special order.
  • Roll formed 18 gauge galvanized guides are fitted with dual polyethylene wear strips to reduce friction and muffle door noises.  All guide attachment to jamb is performed through the guides without the addition of clips welded to the back of the guide.  This gives a neater appearance, increased strength and aids in tight installations.
  • Standard stainless steel cover, slide and four attachment bolts are factory installed.  The slide exhibits magnetic properties that can be used to activate a guide mounted security sensor.  Latch accepts all industry padlocks, including 7/16" diameter shanks.  Provision for cylinder lock included.

Please Note:  All doors under 10' wide and 10' tall are manual lift, pull rope lowered.  Commercial doors more than 10' wide or 10' tall come with a standard reduced drive chain hoist.

Satisfaction Guaranteed
Low Price Guarantee

 

click here to call us today

 

Get our app on the app store

 

Get our app on google play

 


Copyright © 2016 Doors Direct - Roll Up Doors Direct Terms and Conditions
call us today